Incubators and Hotplates
BT Lab Systems: Dual Temperature Control Dry Bath Incubator Dual Heating and Cooling
The Dual Temperature Control Dry Bath Incubator Dual Heating and Cooling has high precision temperature control. It has a microprocessor controlled thermostat and is a good replacement for the traditional...
BT Lab Systems: Dual Temperature Control Dry Bath Incubator Dual Cooling
The Dual Temperature Control Dry Bath Incubator Dual Cooling has high precision temperature control. It has a microprocessor controlled thermostat and is a good replacement for the traditional water bath devices....
BT Lab Systems: Dry Bath Incubator, Four Blocks
A microprocessor-controlled device with highly precise temperature control, making it an alternative to the traditional water bath devices.Increased versatility with four blocks that can be used in multiple combinations.This is...
BT Lab Systems: Dry Bath Incubator, Individually Controlled Dual Blocks
A microprocessor-controlled device with highly precise temperature control, making it an alternative to the traditional water bath devices.Increased versatility with dual blocks that can be used in multiple combinations.This is...
BT Lab Systems: Block, 9 x 8-tube PCR strips (72 x 0.2ml tubes) for BT1110, BT1111, BT1112, BT1113 Dry Bath Incubator
Block, 9 x 8-tube PCR strips (72 x 0.2ml tubes) for BT1110, BT1111, BT1112, BT1113 Dry Bath Incubator.
BT Lab Systems: No Hole Block for Dry Bath
No Hole Block for BT1111 and BT1113 Dry Baths. Ideal for incubating flat bottomed 96 or 384 well plates and culture plates. Not compatible with BT1110 or BT1112.
BT Lab Systems: Block 0.2ml x 48
48 x 0.2ml Tube Block for BT1110, BT1111, BT1112 and BT1113 Dry Baths. Cone shaped holes with diameter of 6.1mm.
BT Lab Systems: 24 x 2ml Tube Block for Dry Bath
24 x 2ml Tube Block for BT1110, BT1111, BT1112 and BT1113 Dry Baths. Round bottom holes with diameter of 10.8mm.
BT Lab Systems: 24 x 1.5ml Tube Block for Dry Bath
24 x 1.5ml Tube Block for BT1110, BT1111, BT1112 and BT1113 Dry Baths. Cone shaped holes with diameter of 10.8mm.
BT Lab Systems: 42 x 0.5ml Tube Block for Dry Bath
42 x 0.5ml Tube Block for BT1110, BT1111, BT1112 and BT1113 Dry Baths. Cone shaped holes with diameter of 8mm.
BT Lab Systems: Block 40mm x 2
2 x 40mm Block for BT1110, BT1111, BT1113 Dry Bath Incubator, 150C. Round bottom holes with diameter of 40.5mm.
BT Lab Systems: Block 28mm x 4
4 x 28mm Block for BT1110, BT1111, BT1113 Dry Bath Incubator, 150C. Flat bottom holes with diameter of 28.5mm.